Skip to content

Service Air Conditioner Tips

  • by

Service Aircon intends to service the air conditioning units of your home or workplace. In many cases, the units (even if bought on special) will probably be working fine and you might not even notice that there are issues with it. However, you should always ensure proper air conditioning servicing for optimum performance of your ac system. This will lower energy cost, shield against the breakdown of components, and optimize air conditioning’s energy efficiency. Therefore, it’s necessary that routine air conditioner maintenance is done so as to maintain your air conditioning system in good shape. The steps listed below will lead you in conducting regular air conditioner maintenance.


First, you have to identify the support areas of your air conditioning system. The ideal strategy is to use a magnifying glass to examine each part. If you have someone beside you who can give you a visual overview of what each component does, then this is quite convenient. You can also try taking a look at the manual or the unit manual whenever you are inspecting it. It’s advisable to look at the ducts too.


When you’ve identified all the sections of your ac units, make a note of the locations. Set them in the order of easiest access to the support staff. Remember that it is not just suitable for the service personnel but also for yourself to support your ac units in the most convenient manner.


Now you have identified the support points of every air conditioning element, wash each one with soapy warm water. Always wash the components with a detergent that includes chlorine so as to ruin any germ that lives in there. This will avoid the spread of germs and diseases. After cleaning the components, rinse it with water, and then leave it to dry.


One important consideration to bear in mind when taking out old air conditioning units is that the filter needs to be replaced often. You are able to replace the filter if it is dirty or clogged. As soon as you have replaced the filter, place the empty air runs indoors, secure them using air clips, and then replace the cap. Close the filter well, so that air flows freely through it.


Now that the air-con ducts have been set up, close all of the support aircon ducts, and flip your air conditioner on. Turn it on as soon as it is cool outside. Wait for the air temperature to drop below the 50-degree limit. Then you need to replace the cap on the ducts as well as pulling out the old aircon filter.


Replace the cover on the air-con ducts together with the brand new one. Connect all the wires, including the three-pronged plugs, and attach the air-con ducts to the air conditioner. Ensure the aircon ducts are placed so that the air intake vents face the front of the house. Also, make sure that all 3 air intake vents are connected firmly to the device.


In the end, turn on the aircon service ducts, and then test the airflow to ensure that the air is operating smoothly. If the air isn’t functioning smoothly, then there may be a blockage somewhere in the system. You need to eliminate the blockage before you are able to run the service aircon ducts again. To do it, you’ll need a tool such as an adjustable wrench, pliers with a blade to grip the turn bolt, and a socket wrench. The support aircon ducts will only run for as long as it’s needed.